Disperse printing thickener EM-630 with ultra low application dosage

Product Name: Disperse Dyes Printing Thickener

Item Code: EM-630

◎ General Description

Disperse dyes printing thickener EM-630 is an anionic acrylic polymer, serving as coloring carrier in fabric printing with dispersive dyes on polyester or polyester blended fabrics. Usually, it can take the place of other kinds of dispersive thickener, like CMT，CMC and CMS at much lower cost. 

◎ Technique Data:

Appearance: Milky white viscous fluid

Ionic Property: Anionic

Solid Content: 72% ±2%

PH value: 6～7  

◎ Property and features

1. Viscous liquid, easy to take out or mix with other auxiliaries.

2. Printing paste is easy to make, it can be ready in a while after high-speed stirring.

3. Post-thickening function allows extra dosage even in case the printing paste is not viscous enough. Add some thickener when stirring to adjust the consistency of printing paste.

4. The performance of prepared printing paste is very stable, which brings no problem to use the rest of paste next time.

5. Printing paste complemented by this thickener has good color yield, sharp definition. Even under special situation, the paste won’t spray out.

6. Economical in use. Comparing to CMT or CMS, EM-630 is very less in application dosage，which largely reduces processing cost.

7. Easy wash-off, hence gain soft hand feeling.

◎ Usage

1. Measure certain dosage of thickener, add specified dosage of water and stir the mixture with high-speed emulsion centrifuge. Paste will be shaped in a few minutes.

2. Mix dyestuff and water together. Add thickener, while mixture is stirred with high-speed emulsion centrifuge, until it reaches required consistency.   

3. Recommended dosage: 2-3% subject to dosage of dyes and required printing viscosity.  

4. Dispersed dyestuff paste formula for reference

  EM-630     Dispersed dyestuff    Water      Total   

  2.0-3.3%          1-10%               X%        100%

◎ Working procedure of printing

Printing→Drying→High steaming fixation→Wash-off→Rear finishing→Finished products

◎ Packing

60KG or 130 KG net in plastic drum

◎ Storage:

 Store in ventilated and cool places

◎ Assurance period

 1 year after delivery

Notes: Above usages have been proved through practice. But considering practical printing technique, please choose the right technical process after experiment.